Featured

A Roof Leak Is More Than Inconvenience

The Roof Leaks

Most Houston residents know that roof repair can be a homeowner’s worst nightmare. Roof problems always seem to happen at just the wrong time. Whether it is a windstorm damaged roof, insurance restoration, a hail damaged roof repair, a leaky roof needing an inspection, or merely an aging roof that needs repairing or replacing it almost never happens at a convenient time. Unfortunately, most roof problems result in leaks, and, to prevent more extensive damage to the property, a roof repair or roof replacement needs to be done as soon as possible.

You Need a Competent Roofing Contractor

For most homeowners, this means they will want to find the best roofing contractor in Houston they can. Closely followed by these concerns.  Does this company know what it is doing? Will they do a good job? Looking over the initial bid wondering, how can I be sure that I am not getting ripped off? Most homeowners do not know very much much about roofing, so they typically turn to a Houston roofing contractor to perform the work for them. Hiring any contractor can be difficult, and, if you do not have a trusted professional that you have used for years, you have to take the chance of hiring an unfamiliar source.

How To Hire An Honest, Quality Roofing Contractor

Regardless, if you have a damaged roof, whether a small leak or a massive hole requiring immediate attention, your best chance of success is hiring a professional Houston roofing contractor. To make sure the company you are considering hiring is the best possible for the job, here are a few things you should look for.

Shoddy Repairs Will Cost More

First, it is important to remember your roof is the top level (no pun intended) of protection for your home. Repairing or replacing it is one of the most important investments you will make in your home. Selecting the right roofer can mean the difference between a high-quality roof that lasts for 20 to 30 years or a shoddy repair job that leaks in as little as two years.

You Get What You Pay For

Second, of course, the price is important when you replace or repair a damaged roof, but a low price tag is not the only thing you should consider.  Building a high-quality roof takes knowledge, skill, years of experience, and using the best materials available. For example, you need to hire a roofer who understands how to use the proper materials. Older and lower- quality shingles may be cheaper, but the likelihood of them not lasting long and leaking is much higher. If the shingles and the water gaps that make up the spaces between them are not straight, the roof will not only look bad, but it may end up leaking as well. Improperly installed flashing can also lead to the deterioration of the roof and problems with leaks. Water that leaks through the roof can do a lot of damage to your floors, walls, insulation, and the wiring of your home. In some cases, water leaks from the roof can even harm the foundation.

High-Quality Materials Cost Less In The Long Run

Finally, quality is a huge consideration. A roof repair or replacement can cost you several thousand dollars. Having to do it again in a few years because your roofing contractor did a lousy job or used shoddy materials would end up costing you even more. Additionally, new damage from a bad roof repair could lead to even more expense. Bottom line, the wrong choice now could end up costing you a lot more money later.

The Right Choice For Houston Residents

Texas Metal Roof Contractors (TMRC) has been helping Houston area homeowners for over 30 years, and have helped with thousands of insurance claims. Let us examine your home and give you the best options for roofing in Houston TX.

 

 

 

Featured

Demand For Metal Roofing Is Growing In The Houston TX Area

Facts Speak Well For Metal Roofing

Why has metal roofing has become a serious rival to traditional roofing materials? Metal roofing has become popular in the Houston TX area because of its high resistance to inclement weather and its long term durability. Most types of metal roofing have a coating of various alloys. Almost all metal roof contractors Houston recommend using a coated metal. These alloys can lengthen the useful life of the roofing from 20 to 100 years depending on weather and type of alloy.

What Are the Protective Coatings Used for Metal Roofing?

They are conventional or dull polyester, PVDF (polyvinylidene fluoride), plastisol, pural and zinc-aluminum alloy. Polyester is the most popular and cheap covering, but it has a low resistance to scratches. Dull polyester is thicker than its conventional analog and has better resistance to rust and weather effect. Standard polyester is 25 micron, while dull polyester is 35 micron. PVDF is as thick as both above mentioned protective coverings, but it has excellent resistance to chemicals, rust, fading and inclement weather. Zinc-aluminum alloy is as thick as conventional polyester, and it is of better quality. And at last, plastisol is the thickest protective covering of all (up to 250 microns). It is resistant to low temperatures, rust, and scratches, but its resistance to temperature drops leaves something to be desired.

Hip Roof

Durability of The Various Meta Roofing Materials

All types of metal roofing are durable, but each of them has its peculiarities. Copper roofing is the most long-wearing (more than 100 years), but its color affected by time and the weather.
Galvanized steel’s durability is highly dependent on the type of protective coating. Roofing steel covered with zinc-aluminum alloy is more resistant to weathering than galvanized steel. As for the aluminum roofing, its durability is about 40 years. Many Houston metal roof contractors recommend Aluminum roofing for use in coastal areas like Galveston that have a high grade of salt concentration in the air.

 

Facts about Metal Roofing Construction

In fact, this information concerns not only metal roofing. If you decided to install metal roofing and cannot decide what construction to choose, this article may be helpful. Let’s start with the rectangular hip roof. As a rule, its faces are on the square and symmetric about the central line. The overhang at the wall protects the wall and the eaves from the inclement weather. Wide eaves make it possible to keep the walls of the house cool. Metal roofing itself reflects heat. Combined with such construction the metal roof considerably reduces energy bills.

Other Types Of Roofs

There is one more type of the hip roof which has extra faces because of the walls different positions. These additional faces produce so-called valleys. At the top, there is a level section which is known as a ridge. The hips sitting on the external corner bound the hip ends and reach the ridge. Such construction may have some problems with leaks; This is not a good situation for metal roofing without protective coating. The next type is a gable roof. It seems to be better than the previous hip roof, but it does not protect the walls as well. That’s because the gable’s overhang size is usually half as much as the eaves of the hip roof. For example, if the typical eaves are 1000 inches, the gable is 500 inches. But the gable roof does provide more space under the ceiling. Now, let us talk about the shed roof. This construction is rather easy and has a slope angle which makes it possible the owner of the metal roofing to forget about problems associated with snow and rain. On the other hand, the owners of the building who decided to install such roof may have difficulties with the ceiling hei

It’s Not Always a Flood

Many Times The Problem Come From Within

Water damage is a serious problem that can affect your property at any time. Most people think of water damage is caused by forces of nature like heavy rain, storms, flooding or even snow. However, there are other sources as well and these the most frequent causes of the water damage to homes. Backed up or overflowing appliances in the kitchen or bathroom, burst pipes for fresh water or sewage, and old plumbing causing leaks are all causes of severe water damage to homes and businesses. Never ignore any of these serious problems. Water inside a building will almost always spread, and as time goes by the problem gets worse, more damage and expense mount up. Call a water damage restoration specialists to clear up the water problem at its source as soon as possible.

 

Broken Water Pipe

Work Needs To Start ASAP

Their technicians will get started immediately with an evaluation of the cause of the water problem and an assessment of what has been damaged. The first step is eliminating the source of the water penetration. After that, they will treat all of your possessions that are salvageable, using our state of the art water extraction process, and store them safely while we move ahead with work on the building. Techs will move any contaminated materials out of harm’s way. They have the equipment and the skills to perform expert water extraction, thorough drying, mold removal and treatment of the air quality.

Repair And Re-Construction

Once the site is completely dried and disinfected, free of any trace of moisture, mold or germs, you can start on the structural repair work. You’ll want a company that can restore the premises to their pre-damaged condition. If roof damage or a roof leak were the cause of the water damage, you’d need a roofing contractor Houston to repair it. Any damage to the building’s plumbing and electrical systems must be completely repaired, to the highest standards of safety. Repair and remove all signs of water damage should be the goal. Once your building is solid and sound, You can have the crowning touch applied– a professional paint job, using mold resistant paint. Now your property is as good or better than new.